RM-2 zoning in Dover, DE

Medium Density Residence (RM-2) is a base zoning district in Dover, Delaware. An one-family det. dwelg. and rooming houses needs a lot of at least 8,000 sq ft and 70 ft wide and setbacks of 25 ft front, 10 ft side and 30 ft rear, and can be up to 35 ft and 2.5 stories tall.
Permitted uses
7
Special uses
0
Smallest lot
1 acres
Mapped area
0.3 sq mi

What RM-2 permits

Permitted7 uses
  • Any use permitted in one-family residence zones
  • One-family lot-line dwellings, not to exceed one such dwelling per lot
  • Duplex dwellings
  • Multiplex dwellings
  • Townhouses
  • Roominghouses accommodating not more than five roomers
  • Garden apartments

Source: City of Dover Code of Ordinances, Appendix B, Zoning

RM-2 setbacks, height and lot size

Building typeOne-family det. dwelg. and rooming housesSec. Article 4, Section 4.8One-family lot line dwelgs.Sec. Article 4, Section 4.8Duplex dwellingsSec. Article 4, Section 4.8Multiple dwelgs.Sec. Article 4, Section 4.8Townhouse dwelgs.Sec. Article 4, Section 4.8Gdn. apt. dwellingsSec. Article 4, Section 4.8
Lot size (min)8,000 sq ft7,000 sq ft5,000 sq ft3,000 sq ft3,000 sq ft3,000 sq ft
Lot width (min)70 ft65 ft40 ft100 ft22 ft100 ft
Lot depth (min)100 ft90 ft100 ft120 ft110 ft125 ft
Front setback25 ft20 ft25 ft30 ft30 ft30 ft
Side setback10 ftNot set15 ft10 ft10 ft20 ft
Rear setback30 ft30 ft30 ft20 ft30 ft30 ft
Height (max)35 ft, 2.5 stories24 ft, 2 stories35 ft, 2.5 stories35 ft, 3 stories35 ft, 3 stories35 ft, 3 stories
Lot coverage (max)35%35%35%35%50%60%

Source: City of Dover Code of Ordinances, Appendix B, Zoning

Find RM-2 sites in Dover

See every part of Dover zoned RM-2 on the map, then open any parcel for its owner, lot size, value, building permits and zoning cases.

RM-2 as data

Every use and standard on this page from one API call, in the same format in every county.

Terminal
curl -G 'https://api.placestack.com/v1/zoning' \
  -H "Authorization: Bearer $PLACESTACK_API_KEY" \
  -d jurisdiction=jur_01m3n2c1nwemkamn29dndywj75 \
  -d code=RM-2 \
  -d include=allowance,standard
Response, shortened
{
  "object": "zoning",
  "id": "zon_01m6df8zxqenaaehzmjcsg3vs4",
  "code": "RM-2",
  "name": "Medium Density Residence",
  "kind": "base",
  "allowances": [
    {
      "use": {
        "name": "Any use permitted in one-family residence zones",
        "category": null
      },
      "result": "permitted",
      "citation": {
        "section": "Article 3, Section 7"
      }
    },
    {
      "use": {
        "name": "One-family lot-line dwellings, not to exceed one such dwelling per lot",
        "category": null
      },
      "result": "permitted",
      "citation": {
        "section": "Article 3, Section 7"
      }
    }
  ],
  "standards": [
    {
      "type": "lot_area_min",
      "label": "Lot area (sq. ft.)",
      "value": {
        "min": 8000,
        "max": null,
        "unit": "sq_ft"
      },
      "qualification": "One-Family Det. Dwelg. and Rooming Houses; Minimum requirements per dwelling unit."
    }
  ]
}

Frequently asked questions

Can I build a duplex in RM-2 in Dover?
Yes. Two-unit living is permitted in RM-2.
What are the setbacks in RM-2?
For a one-family det. dwelg. and rooming houses, 25 ft front, 10 ft side and 30 ft rear.
What is the minimum lot size in RM-2?
8,000 sq ft for an one-family det. dwelg. and rooming houses, 7,000 sq ft for an one-family lot line dwelgs., 5,000 sq ft for a duplex dwellings, 3,000 sq ft for a multiple dwelgs., 3,000 sq ft for a townhouse dwelgs. and 3,000 sq ft for a gdn. apt. dwellings.
How tall can a building be in RM-2?
35 ft for an one-family det. dwelg. and rooming houses, 24 ft for an one-family lot line dwelgs., 35 ft for a duplex dwellings, 35 ft for a multiple dwelgs., 35 ft for a townhouse dwelgs. and 35 ft for a gdn. apt. dwellings.

Check the zoning of any Dover parcel

Start free. No credit card required. Contact sales for higher volumes.

RM-2 zoning in Dover, DE: permitted uses, setbacks and lot size · Placestack