- Permitted uses
- 1
- Special uses
- 7
- Smallest lot
- 3,000 sq ft
- Mapped area
- 0.3 sq mi
What RG-1 permits
Permitted1 uses
- Any use permitted in one-family residence zones
Special use7 uses
- Townhouses
- Duplex dwellings
- Bed and breakfast inns in the RG-1 district only
- Student homes
- Professional offices may be permitted on Governors Avenue between Water Street and Mary Street, and on Route 8
- Antique shops, art galleries, gift and card shops, book stores, specialty hobby stores and restaurants as accessory uses in the historic district zone
- Off-street parking
Source: City of Dover Code of Ordinances, Appendix B, Zoning
RG-1 setbacks, height and lot size
| Building type | One-family dwellings detachedSec. Article 4, Section 4.2 | Duplex/one-family semi-detached and other dwellingsSec. Article 4, Section 4.2 | Townhouses/one-family attachedSec. Article 4, Section 4.2 |
|---|---|---|---|
| Lot size (min) | 6,000 sq ft | 5,000 sq ft | 3,000 sq ft |
| Lot width (min) | 50 ft | 25 ft | 20 ft |
| Lot depth (min) | 100 ft | 100 ft | 100 ft |
| Front setback | 15 ft | 15 ft | 15 ft |
| Side setback | 5 ft | 10 ft | 10 ft |
| Rear setback | 30 ft | 30 ft | 30 ft |
| Height (max) | 35 ft, 2.5 stories | 35 ft, 2.5 stories | 35 ft, 3 stories |
| Lot coverage (max) | 45% | 50% | 60% |
Source: City of Dover Code of Ordinances, Appendix B, Zoning
Find RG-1 sites in Dover
See every part of Dover zoned RG-1 on the map, then open any parcel for its owner, lot size, value, building permits and zoning cases.
RG-1 as data
Every use and standard on this page from one API call, in the same format in every county.
Terminal
curl -G 'https://api.placestack.com/v1/zoning' \
-H "Authorization: Bearer $PLACESTACK_API_KEY" \
-d jurisdiction=jur_01m3n2c1nwemkamn29dndywj75 \
-d code=RG-1 \
-d include=allowance,standardResponse, shortened
{
"object": "zoning",
"id": "zon_01m6df8zxqf04v8c1d8f9v4jcq",
"code": "RG-1",
"name": "General Residence",
"kind": "base",
"allowances": [
{
"use": {
"name": "Any use permitted in one-family residence zones",
"category": null
},
"result": "permitted",
"citation": {
"section": "Article 3, Section 2"
}
}
],
"standards": [
{
"type": "lot_area_min",
"label": "Lot area (sq. ft.)",
"value": {
"min": 6000,
"max": null,
"unit": "sq_ft"
},
"qualification": "One-Family Dwellings Detached"
}
]
}Frequently asked questions
- Can I build a duplex in RG-1 in Dover?
- Only with conditional use approval by the planning commission.
- What are the setbacks in RG-1?
- For a one-family dwellings detached, 15 ft front, 5 ft side and 30 ft rear.
- What is the minimum lot size in RG-1?
- 6,000 sq ft for an one-family dwellings detached, 5,000 sq ft for a duplex/one-family semi-detached and other dwellings and 3,000 sq ft for a townhouses/one-family attached.
- How tall can a building be in RG-1?
- 35 ft for an one-family dwellings detached, 35 ft for a duplex/one-family semi-detached and other dwellings and 35 ft for a townhouses/one-family attached.
Check the zoning of any Dover parcel
Start free. No credit card required. Contact sales for higher volumes.