RM-1 zoning in Dover, DE

Medium Density Residence (RM-1) is a base zoning district in Dover, Delaware. An one-family detached dwellings & rooming houses needs a lot of at least 8,000 sq ft and 70 ft wide and setbacks of 25 ft front, 10 ft side and 30 ft rear, and can be up to 35 ft and 2.5 stories tall.
Permitted uses
6
Special uses
0
Smallest lot
3,000 sq ft
Mapped area
0.8 sq mi

What RM-1 permits

Permitted6 uses
  • Any use permitted in one-family residence zones
  • One-family lot-line dwellings, not to exceed one such dwelling per lot
  • Duplex dwellings
  • Multiplex dwellings
  • Townhouses
  • Roominghouses accommodating not more than five roomers

Source: City of Dover Code of Ordinances, Appendix B, Zoning

RM-1 setbacks, height and lot size

Building typeOne-family detached dwellings & rooming housesSec. Article 4, Section 4.7One-family lot line dwellingsSec. Article 4, Section 4.7Duplex dwellingsSec. Article 4, Section 4.7Multiplex dwellingsSec. Article 4, Section 4.7Townhouse dwellingsSec. Article 4, Section 4.7
Lot size (min)8,000 sq ft7,000 sq ft5,000 sq ft3,000 sq ft3,000 sq ft
Lot width (min)70 ft65 ft40 ft100 ft22 ft
Lot depth (min)100 ft90 ft100 ft120 ft110 ft
Front setback25 ft20 ft25 ft30 ft30 ft
Side setback10 ftNot set15 ft10 ft10 ft
Rear setback30 ft30 ft30 ft20 ft30 ft
Height (max)35 ft, 2.5 stories24 ft, 2 stories35 ft, 2.5 stories35 ft, 3 stories35 ft, 3 stories
Lot coverage (max)35%35%35%35%50%

Source: City of Dover Code of Ordinances, Appendix B, Zoning

Find RM-1 sites in Dover

See every part of Dover zoned RM-1 on the map, then open any parcel for its owner, lot size, value, building permits and zoning cases.

RM-1 as data

Every use and standard on this page from one API call, in the same format in every county.

Terminal
curl -G 'https://api.placestack.com/v1/zoning' \
  -H "Authorization: Bearer $PLACESTACK_API_KEY" \
  -d jurisdiction=jur_01m3n2c1nwemkamn29dndywj75 \
  -d code=RM-1 \
  -d include=allowance,standard
Response, shortened
{
  "object": "zoning",
  "id": "zon_01m6df8zxqebkrb581xyte3tdd",
  "code": "RM-1",
  "name": "Medium Density Residence",
  "kind": "base",
  "allowances": [
    {
      "use": {
        "name": "Any use permitted in one-family residence zones",
        "category": null
      },
      "result": "permitted",
      "citation": {
        "section": "Article 3, Section 6"
      }
    },
    {
      "use": {
        "name": "One-family lot-line dwellings, not to exceed one such dwelling per lot",
        "category": null
      },
      "result": "permitted",
      "citation": {
        "section": "Article 3, Section 6"
      }
    }
  ],
  "standards": [
    {
      "type": "lot_area_min",
      "label": "Lot area (sq. ft.)",
      "value": {
        "min": 8000,
        "max": null,
        "unit": "sq_ft"
      },
      "qualification": "One-Family Detached Dwellings & Rooming Houses"
    }
  ]
}

Frequently asked questions

Can I build a duplex in RM-1 in Dover?
Yes. Two-unit living is permitted in RM-1.
What are the setbacks in RM-1?
For a one-family detached dwellings & rooming houses, 25 ft front, 10 ft side and 30 ft rear.
What is the minimum lot size in RM-1?
8,000 sq ft for an one-family detached dwellings & rooming houses, 7,000 sq ft for an one-family lot line dwellings, 5,000 sq ft for a duplex dwellings, 3,000 sq ft for a multiplex dwellings and 3,000 sq ft for a townhouse dwellings.
How tall can a building be in RM-1?
35 ft for an one-family detached dwellings & rooming houses, 24 ft for an one-family lot line dwellings, 35 ft for a duplex dwellings, 35 ft for a multiplex dwellings and 35 ft for a townhouse dwellings.

Check the zoning of any Dover parcel

Start free. No credit card required. Contact sales for higher volumes.

RM-1 zoning in Dover, DE: permitted uses, setbacks and lot size · Placestack