- Permitted uses
- 7
- Special uses
- 3
- Mapped area
- 0.3 sq mi
What MF permits
Permitted7 uses
- Dwelling: Attached (1-4 units)
- Dwelling: Attached (5-19 units)
- Dwelling: Attached (20+ units)
- Dwelling: Single-family
- Family Care Home
- Park, Cultural or Natural
- Park, Neighborhood
Special use3 uses
- Public Utilities
- Telecommunication Tower
- Transmission Lines
MF setbacks, height and lot size
| Building type | All buildingsSec. 6.3.1 |
|---|---|
| Lot size (min) | 1 acre (required development tract area) |
| Front setback | 35 ft |
| Side setback | 40 ft |
| Rear setback | 40 ft |
| Height (max) | 45/65⁵ |
Find MF sites in Hillsborough
See every part of Hillsborough zoned MF on the map, then open any parcel for its owner, lot size, value, building permits and zoning cases.
MF as data
Every use and standard on this page from one API call, in the same format in every county.
Terminal
curl -G 'https://api.placestack.com/v1/zoning' \
-H "Authorization: Bearer $PLACESTACK_API_KEY" \
-d jurisdiction=jur_01m3n2c1tme0s8e2fpnffsvpwk \
-d code=MF \
-d include=allowance,standardResponse, shortened
{
"object": "zoning",
"id": "zon_01m5f6c7shfbst3xa09rw30wmx",
"code": "MF",
"name": null,
"kind": "base",
"allowances": [
{
"use": {
"name": "Dwelling: Attached (1-4 units)",
"category": null
},
"result": "permitted",
"citation": {
"section": "5.1.7"
}
},
{
"use": {
"name": "Dwelling: Attached (5-19 units)",
"category": null
},
"result": "permitted",
"citation": {
"section": "5.1.7"
}
}
],
"standards": [
{
"type": "setback_side",
"label": "Minimum Side Yard Width",
"value": {
"min": 40,
"max": null,
"unit": "ft"
},
"qualification": null
}
]
}Frequently asked questions
- What are the setbacks in MF?
- For a all buildings, 35 ft front, 40 ft side and 40 ft rear.
- What is the minimum lot size in MF?
- 1 acre (required development tract area) for an all buildings.
- How tall can a building be in MF?
- 45/65⁵ for an all buildings.
Check the zoning of any Hillsborough parcel
Start free. No credit card required. Contact sales for higher volumes.