GI zoning in Hillsborough, NC

GI is a base zoning district in Hillsborough, North Carolina. An all buildings needs a lot of at least 40,000 sq ft and 200 ft wide and setbacks of 35 ft front, 50 ft side and 50 ft rear, and can be up to 65 ft tall.
Permitted uses
25
Special uses
10
Smallest lot
40,000 sq ft
Mapped area
0.4 sq mi

What GI permits

Permitted25 uses
  • Artisan Studio
  • Botanical Garden & Arboretum
  • Brewery
  • Building/Trade Contractor’s office
  • Farmer's Market
  • Flex Space
  • Food Preparation Business
  • Greenhouses/Nursery
  • Manufacturing Complex
  • Microbrewery
  • Motor Vehicle Repair
  • Office operations
  • Order Fulfillment Center
  • Outlet sales
  • Park and Ride Facility
  • Public Safety Services
  • Research Facility
  • Research Facility, Intense
  • School: Dance, Martial Arts
  • School: Vocational
  • Storage & Warehousing: Inside building, excluding explosives & hazardous wastes
  • Storage & Warehousing: Outside
  • Storage & Warehousing: Self
  • Wholesale sales, indoor
  • Wholesale sales, with outdoor storage/display
Special use10 uses
  • Dwelling: Attached (1-4 units)
  • Dwelling: Attached (5-19 units)
  • Dwelling: Attached (20+ units)
  • Junkyard/Outside Storage of Junked or Wrecked Motor Vehicles
  • Kennels, Boarding
  • Petroleum Products (storage & distribution)
  • Processing Facility
  • Public Utilities
  • Telecommunication Tower
  • Transmission Lines

Source: Hillsborough Unified Development Ordinance

GI setbacks, height and lot size

Building typeAll buildingsSec. 6.3.2
Lot size (min)40,000 sq ft
Lot width (min)200 ft
Front setback35 ft
Side setback50 ft
Rear setback50 ft
Height (max)65 ft

Source: Hillsborough Unified Development Ordinance

Find GI sites in Hillsborough

See every part of Hillsborough zoned GI on the map, then open any parcel for its owner, lot size, value, building permits and zoning cases.

GI as data

Every use and standard on this page from one API call, in the same format in every county.

Terminal
curl -G 'https://api.placestack.com/v1/zoning' \
  -H "Authorization: Bearer $PLACESTACK_API_KEY" \
  -d jurisdiction=jur_01m3n2c1tme0s8e2fpnffsvpwk \
  -d code=GI \
  -d include=allowance,standard
Response, shortened
{
  "object": "zoning",
  "id": "zon_01m5f6c7shea99zwp6zea0rkp1",
  "code": "GI",
  "name": null,
  "kind": "base",
  "allowances": [
    {
      "use": {
        "name": "Artisan Studio",
        "category": null
      },
      "result": "permitted",
      "citation": {
        "section": "5.1.8"
      }
    },
    {
      "use": {
        "name": "Botanical Garden & Arboretum",
        "category": null
      },
      "result": "permitted",
      "citation": {
        "section": "5.1.8"
      }
    }
  ],
  "standards": [
    {
      "type": "lot_area_min",
      "label": "Minimum Lot Area (sf or acre)",
      "value": {
        "min": 40000,
        "max": null,
        "unit": "sq_ft"
      },
      "qualification": null
    }
  ]
}

Frequently asked questions

What are the setbacks in GI?
For a all buildings, 35 ft front, 50 ft side and 50 ft rear.
What is the minimum lot size in GI?
40,000 sq ft for an all buildings.
How tall can a building be in GI?
65 ft for an all buildings.

Check the zoning of any Hillsborough parcel

Start free. No credit card required. Contact sales for higher volumes.

GI zoning in Hillsborough, NC: permitted uses, setbacks and lot size · Placestack