CONS zoning in Harnett County, NC

CONSERVATION (CONS) is a base zoning district in Harnett County, North Carolina. It permits single family dwellings (including modular homes) by right, among 7 permitted uses, and 1 more as special uses. An all buildings needs a lot of at least 30,000 sq ft and 100 ft wide and setbacks of 35 ft front, 10 ft side and 25 ft rear, and can be up to 35 ft tall.
Permitted uses
7
Special uses
1
Smallest lot
30,000 sq ft
Mapped area
26.4 sq mi

What CONS permits

Permitted7 uses
  • Single Family Dwellings (including modular homes)Traditional Household Residential
  • Bona Fide Farm & AgritourismAGRICULTURE & FORESTRY USES
  • NurseryAGRICULTURE & FORESTRY USES
  • Preserves (Nature, Wildlife, or Forest)AGRICULTURE & FORESTRY USES
  • ParksPublic Services
  • Publicly Owned Utility Structures & FacilitiesUTILITY USES
  • Nonresidential Building, TemporaryTEMPORARY USES
Special use1 uses
  • Recreational CampgroundLodging Services
Not stated1 uses
  • Privately Owned Public Utility Structures & FacilitiesUTILITY USES

Unlisted uses: Classification by the Zoning Administrator (Sec. Article V, 1.1)

Source: Harnett County Unified Development Ordinance

CONS setbacks, height and lot size

Building typeAll buildingsSec. Article IV, 7.4
Lot size (min)30,000 sq ft
Lot width (min)100 ft
Front setback35 ft
Side street setback20 ft
Side setback10 ft
Rear setback25 ft
Height (max)35 ft

Source: Harnett County Unified Development Ordinance

Find CONS sites in Harnett County

See every part of Harnett County zoned CONS on the map, then open any parcel for its owner, lot size, value, building permits and zoning cases.

CONS as data

Every use and standard on this page from one API call, in the same format in every county.

Terminal
curl -G 'https://api.placestack.com/v1/zoning' \
  -H "Authorization: Bearer $PLACESTACK_API_KEY" \
  -d jurisdiction=jur_01m3n2c1tkfqvb87h1vwxkemtg \
  -d code=CONS \
  -d include=allowance,standard
Response, shortened
{
  "object": "zoning",
  "id": "zon_01m52h109me7k9jm1rbmz38gts",
  "code": "CONS",
  "name": "CONSERVATION                                                                                        ",
  "kind": "base",
  "allowances": [
    {
      "use": {
        "name": "Single Family Dwellings (including modular homes)",
        "category": "Traditional Household Residential"
      },
      "result": "permitted",
      "citation": {
        "section": "Article V, 1.2"
      }
    },
    {
      "use": {
        "name": "Bona Fide Farm & Agritourism",
        "category": "AGRICULTURE & FORESTRY USES"
      },
      "result": "permitted",
      "citation": {
        "section": "Article V, 1.2"
      }
    }
  ],
  "standards": [
    {
      "type": "lot_area_min",
      "label": "Minimum Lot Area (square feet)",
      "value": {
        "min": 30000,
        "max": null,
        "unit": "sq_ft"
      },
      "qualification": null
    }
  ]
}

Frequently asked questions

What are the setbacks in CONS?
For a all buildings, 35 ft front, 10 ft side and 25 ft rear.
What is the minimum lot size in CONS?
30,000 sq ft for an all buildings.
How tall can a building be in CONS?
35 ft for an all buildings.
What about a use the ordinance does not list?
Classification by the Zoning Administrator, under Sec. Article V, 1.1.

Other Harnett County districts

Check the zoning of any Harnett County parcel

Start free. No credit card required. Contact sales for higher volumes.

CONS zoning in Harnett County, NC: permitted uses, setbacks and lot size · Placestack