MH zoning in Clemmons, NC

MH is a base zoning district in Clemmons, North Carolina. It permits residential building, single family, manufactured home, class a, class b and class c by right, among 9 permitted uses, and 10 more as special uses. An all buildings needs a lot of at least 10,000 sq ft and 70 ft wide and setbacks of 30 ft front, 10 ft side and 20 ft rear, and can be up to 40 ft tall.
Permitted uses
9
Special uses
10
Smallest lot
10,000 sq ft
Mapped area
0.0 sq mi

What MH permits

Permitted9 uses
  • Residential Building, Single FamilyResidential Uses
  • Manufactured Home, Class AResidential Uses
  • Class BResidential Uses
  • Class CResidential Uses
  • Family GroupResidential Uses
  • Recreation Facility, PublicRecreational Uses
  • Swimming Pool, PrivateRecreational Uses
  • Church or Religious Institution, NeighborhoodInstitutional And Public Uses
  • Police or Fire StationInstitutional And Public Uses
Special use10 uses
  • Manufactured Housing DevelopmentResidential Uses
  • Golf CourseRecreational Uses
  • Church or Religious Institution, CommunityInstitutional And Public Uses
  • Landfill, Land Clearing/Inert DebrisInstitutional And Public Uses
  • School, PrivateInstitutional And Public Uses
  • School PublicInstitutional And Public Uses
  • Access Easement, Private Off-SiteTransportation And Utilities
  • Park and Shuttle LotTransportation And Utilities
  • Transmission TowerTransportation And Utilities
  • UtilitiesTransportation And Utilities

Unlisted uses: Classification by the Zoning Officer (Sec. 2-4.3)

Source: Village of Clemmons Unified Development Ordinances

MH setbacks, height and lot size

Building typeAll buildingsSec. 3-1.1
Lot size (min)10,000 sq ft
Lot width (min)70 ft
Front setback30 ft
Side street setback20 ft
Side setback10 ft
Rear setback20 ft
Height (max)40 ft

Source: Village of Clemmons Unified Development Ordinances

Find MH sites in Clemmons

See every part of Clemmons zoned MH on the map, then open any parcel for its owner, lot size, value, building permits and zoning cases.

MH as data

Every use and standard on this page from one API call, in the same format in every county.

Terminal
curl -G 'https://api.placestack.com/v1/zoning' \
  -H "Authorization: Bearer $PLACESTACK_API_KEY" \
  -d jurisdiction=jur_01m3n2c1tke9ytyc3wkfx36dfg \
  -d code=MH \
  -d include=allowance,standard
Response, shortened
{
  "object": "zoning",
  "id": "zon_01m5295kd5f83vpr29jm8p5wez",
  "code": "MH",
  "name": null,
  "kind": "base",
  "allowances": [
    {
      "use": {
        "name": "Residential Building, Single Family",
        "category": "Residential Uses"
      },
      "result": "permitted",
      "citation": {
        "section": "2-4.1"
      }
    },
    {
      "use": {
        "name": "Manufactured Home, Class A",
        "category": "Residential Uses"
      },
      "result": "permitted",
      "citation": {
        "section": "2-4.1"
      }
    }
  ],
  "standards": [
    {
      "type": "lot_area_min",
      "label": "Minimum zoning lot, area (sf)",
      "value": {
        "min": 10000,
        "max": null,
        "unit": "sq_ft"
      },
      "qualification": null
    }
  ]
}

Frequently asked questions

What are the setbacks in MH?
For a all buildings, 30 ft front, 10 ft side and 20 ft rear.
What is the minimum lot size in MH?
10,000 sq ft for an all buildings.
How tall can a building be in MH?
40 ft for an all buildings.
What about a use the ordinance does not list?
Classification by the Zoning Officer, under Sec. 2-4.3.

Check the zoning of any Clemmons parcel

Start free. No credit card required. Contact sales for higher volumes.

MH zoning in Clemmons, NC: permitted uses, setbacks and lot size · Placestack