RM-12 zoning in Gibsonville, NC

RM-12 is a base zoning district in Gibsonville, North Carolina. A multi-family developments (including townhouses, condominiums, private dormitories, and congregate care facilities) needs a lot of at least 15,000 sq ft and 75 ft wide and setbacks of 25 ft front, 10 ft side and 25 ft rear, and can be up to 50 ft tall.
Permitted uses
0
Special uses
0
Smallest lot
15,000 sq ft
Mapped area
0.1 sq mi

RM-12 setbacks, height and lot size

Building typeMulti-family developments (including townhouses, condominiums, private dormitories, and congregate care facilities)Sec. 4-4.2
Lot size (min)15,000 sq ft
Lot width (min)75 ft
Front setback25 ft
Side setback10 ft
Rear setback25 ft
Height (max)50 ft
Lot coverage (max)45%

Source: Gibsonville Development Ordinance

Find RM-12 sites in Gibsonville

See every part of Gibsonville zoned RM-12 on the map, then open any parcel for its owner, lot size, value, building permits and zoning cases.

RM-12 as data

Every use and standard on this page from one API call, in the same format in every county.

Terminal
curl -G 'https://api.placestack.com/v1/zoning' \
  -H "Authorization: Bearer $PLACESTACK_API_KEY" \
  -d jurisdiction=jur_01m3n2c1tmfe59eajk9n7qjesh \
  -d code=RM-12 \
  -d include=allowance,standard
Response, shortened
{
  "object": "zoning",
  "id": "zon_01m52fvyk8f0xv2fydchgrmkr9",
  "code": "RM-12",
  "name": null,
  "kind": "base",
  "allowances": [],
  "standards": [
    {
      "type": "lot_area_min",
      "label": "Min Lot Size (sq/ft) (for first 3 DU’s)",
      "value": {
        "min": 15000,
        "max": null,
        "unit": "sq_ft"
      },
      "qualification": "Multi-family developments (including townhouses, condominiums, private dormitories, and congregate care facilities)"
    }
  ]
}

Frequently asked questions

What are the setbacks in RM-12?
For a multi-family developments (including townhouses, condominiums, private dormitories, and congregate care facilities), 25 ft front, 10 ft side and 25 ft rear.
What is the minimum lot size in RM-12?
15,000 sq ft for a multi-family developments (including townhouses, condominiums, private dormitories, and congregate care facilities).
How tall can a building be in RM-12?
50 ft for a multi-family developments (including townhouses, condominiums, private dormitories, and congregate care facilities).
What about a use the ordinance does not list?
Classification by the Enforcement Officer, under Sec. 4-3.1.

Check the zoning of any Gibsonville parcel

Start free. No credit card required. Contact sales for higher volumes.

RM-12 zoning in Gibsonville, NC: permitted uses, setbacks and lot size · Placestack